MATERIALS

• Body: thermoplastic (PP, POM or PA+FV)
• Filter (single or double): plastic (removable), metallic (removable or not)
• Metal parts: galvanized steel
• Membrane: rubber (EPDM or Nitrile) silicone (non-toxic)
• Terminals: brass
• Recordings: according to customer specifications

OPERATING PRESSURE

• From 0,2 to 8 kgf/cm2 (rubber membrane);
• From 0,2 to 4 kgf/cm2 (silicone membrane - non-toxic); From 0,2 to 10 kgf/cm2 (maximum pressure, on request); At 0,2 kgf/cm2, minimum flow (without regulator) = 4 l/min; At 8 kgf/cm2, maximum flow (without regulator) = 30 l/min; Optional - flow regulators (5l/min., 6,5l/min.,
• 8 l/min., 12 l/min., 20 l/min. and other flow rates on request) OBS. flow measured directly in 3/4" tubing

Liquid temperature: 60°C

Above 60°C, upon request

Dielectric strength: 1.500Vac - 1 min.

Water outlet (hose connection):

Geometric layout in relation to the input:

• reta
• 90o

Number of inputs / outputs:

• 1 input / 1 output
• 1 input / 2 outputs
• 1 input / 3 outputs

Useful life:

> 50.000 operations

Terminal type (power):

• Straight pattern; folded (upon request); Faston 6,3 x 0,8 mm
• Faston 4,8 x 0,8 mm
• Case 2,5

COIL

• Flammability Options: V0 or HB
• Tension: 110/120 Vac / 60 Hz
  220/240Vac / 50-60Hz
  12Vdc
  24Vdc

Other voltages on request.

Water inlet: Screw thread

1. 3/4" x 11,5 - NHT
2. .3/4" x 14 - NBR-8133
3. 8,5mm Hose Spike (EVA 08 and EVA17)
4. 1/2"X 14 - NBR -8133 (EVA 18)
5. 1/2" X 14 - NPT (EVA 18), on request

OUTPUT DIMENSIONS (mm)

Custom code	B	C	Models
01	13.5	14.5	EVA 06, EVA 07
06	10.5	12.5	EVA 07
07	10.5	12.0	EVA 06, EVA 09, EVA 14
08	10.5	--	EVA 10, EVA 11
09	6.5	--	EVA 08
10	3/8" thread	19 FPP	EVA 09, EVA 07
11	10.2	--	EVA 12, EVA 15
12	1/2" thread	14 FPP	EVA 18
13	8	--	EVA 17

To ensure preparation of samples and quotations suitable for your application, please provide the information below:

1. Water inlet valve model:

• dimensions/geometry
• output position in relation to input: straight or 90
• number of inputs / outputs: 1 input and 1 output, 1 input and 2 outputs or 1 input and 3 outputs
• Filter type: single or double, removable or not

2. Coil voltage: 110/120Vac / 60Hz, 220/240Vac / 50-60Hz, 12Vdc or 24Vdc

3. Position of the water inlet in relation to the support: A

4. Position of the coil in relation to the water inlet: upon request

5. Water inlet thread: 3/4" x 11,5FPP - NHT or 3/4" x 14FPP - NBR - 8133 or 3/8" x 19FPP or ½"x 14FPP -NBR - 8133 or ½"x14PP ( NPT)

6. Normal or non-toxic version (EPDM, Nitrilica or Silicone)

7. Filter:

• plastic - removable
• Metal - removable or not

8. Type of support: see Technical Specifications

9. Dimensions of the water outlet: see Technical Specifications

10. Mounting position of the bracket in relation to the coil (upon request)

11. Flow regulator:

• 5 l / min.
• 6,5 l / min.
• 8 l / min.
• 12 l / min.
• 20 l / min.
• Other flows on request
• Without regulator (standard 30 l/min. at 8kgf/cm)

12. Application:

• working pressure range (kgf/cm) and flow (l/min.)
• equipment on which it will be applied
• liquid: specify the maximum temperature and if not clean water. E.g.: water with debris, chemicals, etc.
• service life: in test cycles and conditions
• temperature range to which it is exposed
• specific operating conditions
• test specifications

13. Estimated monthly consumption

14. Quantity and delivery date of samples or estimated production start date